Dynamic Balsa logo

P.O. Box 107
310 Walnut St.
Leonore, IL 61332

[email protected]

Prices on cart do NOT Include Shipping!  Actual shipping will be added when shipped.


Scale Cockpits


See Temp Products

Used RC Items For Sale

Sanding Tools

Prop Kits

Foam Wings



Contact Us



Pink-It Home What is Pink-it? Directions Silver Dollar Patches Free Prop Decals

Pink-It tapes are super easy to apply. Put them in place, adhesive side down (the adhesive side is a little bit shinny) and iron them down with a trim iron. You are done. How easy was that?

Remember that "rib" tapes use one long piece that go all the way up around and over each rib. Start by ironing down a small portion of the rib tape at the top trailing edge of the wing. Then gently pull the piece of rib tape up and over the rib and gently iron down, then continue wrapping the same piece of tape over and around the leading edge ironing down as you go, then gently pull remaining piece of tape back to the bottom trailing edge and iron down. One piece of tape is used to wrap all the way around the rib and trailing edge.
Once all the rib tapes are applied, it is time to apply the perimeter tapes. Start by centering the perimeter tape over the leading edge and iron down just the very center section that touches the center of the leading edge. Do not iron down the top and bottom halves of the perimeter tapes (the part with the pinked edges that get folded over to the top and bottom sides) just yet. With the tape centered over the leading edge gently pull the tape towards the wing tip. Iron it down. Then while pulling on the tape with one hand and lightly heating the tape with your trim iron in the other hand (you will feel the tape stretch a bit as you apply heat) pull the tape down over the center of the wing tip. Heating and pulling the tape helps it conform over the wing tip better. Once you get it pulled and ironed down around the wing tip you can go back and finish ironing down the top and bottom portions of the leading edge perimeter tape. It may sound like a lot, but actually it goes down very easily.

Can I use Pink-It tapes over Koverall or Stits covering?? Absolutely! Just make sure you have all the "fill" coats you need to fill the weave of those fabrics applied first, then apply the Pink-It tapes. Once the Pink-It tapes are applies continue with your color coats.

Pink-It tapes also work very well over 21st Century fabrics as well.

Pink-It tapes are fuel proof....but I still recommend at least a clear coat be applied. Fabric coverings have a weave. Dirt and grim can and will get down in the weave making it very hard to keep your plane clean. Applying a color or a clear coat will help seal the weave making your plane much, much easier to keep clean, plus it will help seal down all those little pinks on the Pink-It tapes. Its a win -win situation.